Puma P75 415V Professional Package

Puma P75 415V Professional Package is a 415 V three-phase electric belt-driven, oil-lubricated reciprocating compressor with a Puma cast iron pump and 330 Litres receiver.

Published free air delivery is 1,520 L/min (53.7 cfm). Maximum pressure is 900 kPa (130 psi). Free air delivery and maximum pressure are separate manufacturer ratings.

This package pairs the PU P75 415V compressor with a FR020A refrigerant dryer, T15P, 3 Micron Particulate pre-filter and T15U, 1 Micron Coalescing post-filter. Drying and filtration do not make the compressor oil-free.

Manufacturer package photographs are illustrative; component models are specified in the specification list.

The Puma belt-drive instruction manual recommends an average pumping duty cycle no greater than 75% (45 minutes per hour), with individual loaded runs no longer than 10 minutes.

Puma belt-drive instruction manual

• Air Compressor: PU P75 415V
• Motor Power: 11 kW (15 hp)
• Free Air Delivery: 1,520 L/min (53.7 cfm)
• Maximum Pressure: 900 kPa (130 psi)
• Pre Filter: T15P, 3 Micron Particulate
• Refrigerant Dryer: FR020A
• Post Filter: T15U, 1 Micron Coalescing
• Product Code: PU P75 415V PKG
• Pump Displacement: 1,965 L/min (69.4 cfm)
• Tank Volume: 330 Litres
• Pump Model: Puma PG151
• Pump Speed: 815 rpm
• Current Draw: 23.0 Amps
• Power Source / Supply: 415 V three-phase electric
• Technology: Belt-driven reciprocating / piston
• Lubrication: Oil-lubricated
• Air Delivery Test Standard: AS 4637-2006; the brochure does not state a specific FAD test pressure
• Duty Cycle Guidance: Maximum 75% average pumping time; individual loaded runs no longer than 10 minutes (Puma belt-drive manual)

Specifications: Glenco Puma current product listing; product code PU P75 415V PKG. Refer to the linked manufacturer brochure for installation requirements.